Avance solo & avance solo adapt
On this page you will find videos and downloadable guides on how to apply the system, achieving a seal, changing canister, as well as what the various alarms and alerts mean and smart tips and tricks in general.
Using Avance Solo
The Avance Solo Negative Pressure Wound Therapy (NPWT) system delivers continuous negative pressure of -125mmHg. The content below gives a brief guidance to the setup and use of the system.
Using Avance Solo Adapt
The Avance Solo Adapt Negative Pressure Wound Therapy (NPWT) system delivers continuous negative pressure of -125mmHg to the wound site while transporting exudate from the wound to a distal canister
Avance soloHow to apply
Watch this instructional video to learn how to apply the Avance Solo Adapt system.
USING THE SYSTEMErrors and Alarms
Learn what the different visual signals and audible alarms that can be emitted by the system mean.
End of therapy and Internal fail alarm
Pause mode and Invalid button press
Low battery alarm
Using The systemChanging canister
If the fill level (inspected at the back of the canister) looks full, or the pump blockage alarm has gone off, you need to replace the canister. Watch the video to learn how to do this, or view section 6.8 in the Instructions For Use document, provided with your system.
Using The systemShowering with the system
For daily hygiene routines, do not expose the dressing or pump with canister to jets of water. Light showering is allowed when the pump and canister tubing has been disconnected from the dressing tubing. Watch the video for instructions.